Newton's Nook Challenge 170

This is my adorable entry into the Newton's Nook Inky Paws Challenge 170, which took me several tries to get Newton just right!

I used Newton's Nook Ornamental Newton for the stamp, with a little creative masking to make it look like a ball instead of an ornament.

Other products:

Distress Oxide in Blue Prize Ribbon and Wild Honey

Copic and other Alcohol Markers

Gelly Roll white gel pen

Ranger Ink Emboss It Pen Clear

White Embossing Powder

Circle stencil is one that me and my husband designed and printed out on our 3D Printer!  

Sentiments is my own hand writing

 

the original stamp set, sadly is retired, and one of my favorites!  

Newton's Christmas Stamps are some of the best out there!

I used a sticky note to stamp first, then trimmed out the parts I wanted to mask, and then stuck them on the stamp, inked it up, then used my MISTI to do the work.  It took me several tries to get it right, then, this happened....

I just HATED the coloring!  It was stamped on inexpensive cardstock and the ink bled pretty awful.  I also hated the color choices.  the first two cats didn't do well, the inside of the ornament still stamped a little, and one I didn't trace the circle well.  By the way, did you know that a standard poker chip is about the same diameter as this ornament?  Yeah!  I thought it was cool too!

So hope I win the random drawing, since I only have Christmas stamps, cactus, and a valentine themed stamp.  I want to get some of the new spring sets!!

Having fun with a Challenge!

I am loving doing some card challenges!  I actually submitted my very first challenge to Newton's Nook, let me know what you think!

I used the Cultivated Cacti stamp and die set for the back ground, and Cuppa Cactus stamp and die set for the really cute cactus in a cup!!!  

AND, my first time out I was selected as a favorite!  YEY!  So, I get to use this badge and I'm so excited!  I will be doing more of these challenges, first of all they are really fun, and you could win store credit so why wouldn't we do it!

Inky Paws Challenge #168

Christmas Card and Tags 2021

 I feel like I've dropped off the face of the earth for a while.  We have had several health scares in the family and I've been away from blogging just as I was starting up again.  I have been making cards since, but unable to post until now.

My husband and I got into designing stencils and printing them on the 3D printer!  This was our attempt at layering, with the leaves and the berries.  I think it turned out nice!  And, I added the smiles for fun!

The candy stripes is ALSO a home made stencil!  

Distress Oxides - mowed lawn, candied apple

Kindred Stamps - Santa's Elf

Lawn Fawn - smiles from Pizza my Heart, sentiment from Merry Messages

Copic Coloring

I love making Christmas scenes! 

Kindred Stamps - Merry Whatever (retired)

This tree is from a random stamp set I got years ago, but it's awesome!

Copic Color

Distress Oxide - Ocean

I LOVE making Tags! I don't buy them anymore!  I have a TON of Christmas themed paper so I try to use it as much as possible

Avery Elle Merry Circle Tags and 
Avery Elle-ments Holiday Circle Tags
Lawn Fawn inks in Fish Tank, Sunflower, Jalapeno, Lobster

(Note, these inks are AMAZING, but the Lobster totally stains the stamps!)

various stickles to match

I made cards for Jake's Teachers, this turned out so freakin cute!

Brick Stencil is home made by me and Dean!

Distress Oxide Fired Brick and Black Soot

Lawn Fawn Die Shadow box card dies with Fireplace Add On

Lawn Fawn Reveal Wheel Square Window Add On

The portraits are just snippets from a really colorful Christmas printed paper I had in my stash

This is a spinner card!  I just absolutely LOVE this nutcracker set, and since the guy is symmetrical, he spins well!

Newton's Nook Nutcrackers

Glitter and other printed cardstock

Copic Coloring

I also had to make a bunch of last minute cards that I wanted to "mass produce".

Simon Says Stamp Happy Poinsettia

Avery Elle Merry Circle Tags sentiment

Lawn Fawn Inks in Lobster, Jalapeno, and Sunflower

Red Stickles

Halloween Costume Time!!!! Part 4 - The finishing touches

AAAAAAAAAAAAAAAAND WE MADE IT!!!!

This was a really long process of research on all sorts of cool Cosplay sites and 3D printing sites, but we are finished and all is AWESOME!

The (almost) finished helmets.  I still have to add the face shield and "skuff up" Boba Fett's helmet.

I used some clear face shields we had on hand, may go get some window tint for Halloween, but it will be dark, so I think the clear works for 10 yr old boys!

 

Jet pack and both helmets done!!!!

 

And, the Big show, at the 2021 Texas Renaissance Festival - 1001 Dreams Weekend

 

And, Jake and Liam meeting a fellow Mandalorian! 

When we took this picture we said "say this is the way" instead of "cheese" and he said it back and it sounded just like Mando!!!  Was so cool!!!  

So, that is IT!  I hope you enjoyed this journey just as much as I did!  I will now resume normal life and crafting and scrapbooking.  OH WAIT!  I have one more costume to make (Fennec) and I'll post when that's done too!

Halloween Costume Time!!!! Part 3 - 3D Printing

Last year, 2020, we purchased a 3D printer, with the initial use would be to print masks and face shield parts to donate for the medical community.  We had always wanted one, but never really knew much about them.  But, lots of people who had one were also printing stuff to help out, so we went ahead and got one.  We printed out masks and face shield parts for a few weeks, and were glad we could help out in some small way.

We then played around with our printer, enjoying the fun stuff we could do, printing things to help Dean, things to play with, and all that.  Then, after about 8 months, it clogged.  The feeder tube stopped feeding the filament, and it no longer worked.  We knew we needed to take apart the thing to see if we could fix it, but we "never got around to it".  Fast-forward to September 2021, we asked a friend who we know has a printer to print some Mando weapons for us since ours was broken.  He is a nice guy and of course offered to do that, and offered some suggestions to fix the old printer we have.  Well, we decided to give up on that and bought a NEW PRUSA 3D printer, and the quality of this thing is awesome!  We told our friend we got a new one and could print the guns, so we were off! 

  

This is Mando's "Amban phase-pulse blaster" (I had to look that up).  Dean found the pattern online for free so we went to town!

 

Here are the mando guns in progress!

Funny story. Liam (Jake's friend) asked if he was going to have "the back pack" for Boba Fett, and I said yes, if I have time, and had fully planned on making the thing out of cardboard and pipes.  HOWEVER, Dean found that pattern too!!!

 

This thing is huge, and really really cool!!!!

This is us priming the 3D prints after gluing them together.  Let me tell you, i'm not sure how people keep their 3D prints together, but we had the hardest time!  Superglue works, but one tap and it breaks, especially the blaster!  We will need to work on a solution for that in the future.

AND, after experimenting with paints, air brushing (I'll go into that once I get to the helmets again) and acrylic paint, here is the finished blaster!

Will post jet pack picture once I show you the helmet process first!